ROBO-8116G2AR-Q670E
- Home
- products
- Passive Backplane & PICMG SBC
- ROBO-8116G2AR-Q670E
ROBO-8116G2AR-Q670E
Intel® Core™ Processor Series 2 and 12th/13th/14th Generation chipset 600 series with processor based on PICMG 1.3 SHB with DDR5 SDRAM, HDMI®, DVI-D, DP, Dual 2.5Gigabit Ethernet, Audio and USB
Features :
- Supports Intel® Core™ Processors (Series 2), Intel® Core™ Processors (Series 2) with P-cores and 12th/13th/14th Generation Core processors family in LGA 1700 package
- Delivers up to 64GB maximum DDR5 4800 Non-ECC SO-DIMM on two sockets
-
Supports mutiple display by DVI-D, DP and HDMI®
High speed dual 2.5Gigabit Ethernet based on PCI express x 1, high bandwidth I/O interface
Support one UBS 3.2 Gen2x2 and two USB 3.2 Gen2 on REAR I/O
Support on board TPM2.0
ROBO-8116G2AR-Q670E is based on Intel® 600 series chipset and workstation processors. Built with flexible PCI express expansions, ROBO-8116G2AR-Q670E is suitable for Medical, Industrial automation, and Digital Signage application.
| Model | ROBO-8116G2AR-Q670E |
|---|---|
| Form Factor | PICMG 1.3 Full-Size |
| General | ||
|---|---|---|
| Processor |
| |
| Chipset | Intel® Q670E | |
| BIOS | AMI UEFI BIOS | |
| Memory | Supports up to 64GB DDR5 4800 MT/s on 2 × Non-ECC SO-DIMM Slots | |
| Storage |
| |
| Watchdog Timer | Programmable Watchdog Timer with Timeout Period from 0.5 Seconds to 254.5 Seconds | |
| Graphic Controller | Intel® Graphics with DirectX 12.0 and OpenGL 4.5 Support | |
| Rear I/O | ||||||||
|---|---|---|---|---|---|---|---|---|
| Ethernet | 2 x Intel® I226LM with 2.5 GbE LAN (10/100/1000/2500 Mbps) | |||||||
| USB | 1 x USB 3.2 Gen2x2 Type-C (Bracket) | |||||||
| 2 x USB 3.2 Gen2 Type-A (Bracket) | ||||||||
| Display | 1 x DisplayPort 1.2 (4096 × 2160 @ 60Hz) | |||||||
| 1 x DVI-I (1920 × 1200 @ 60Hz) | ||||||||
| 1 x HDMI® 2.0 (4096 × 2160 @ 30Hz) | ||||||||
| Expansion I/O | ||||||||
|---|---|---|---|---|---|---|---|---|
| PCIe | 1 x PCIe Gen5 x16 (1 x16 mode, 2 x8 mode) | |||||||
| 1 x PCIe Gen4 x4 (1 x4 mode, 4 x1 mode) | ||||||||
| 2 x PCIe Gen4 x4 via B2B card connection with Backplane | ||||||||
| 1 x PCIe Gen3 x4 via B2B card connection with Backplane | ||||||||
| PCI | 4 x PCI 33 MHz | |||||||
| Audio | 1 x Pin Header supporting Line-in, Line-out, Mic-in with Realtek ALC888S | |||||||
| Serial Port | 2 x Pin Header supporting RS-232 | |||||||
| 2 x Pin Header supporting RS-232/422/485 | ||||||||
| USB | 2 x USB 3.2 Gen1 through 1 Pin Header | |||||||
| 4 x USB 2.0 Pin Header | ||||||||
| 4 x USB 2.0 via Backplane | ||||||||
| M.2 | 1 x M.2 M-Key 2280 supporting SATA and PCIe x4 (bottom side) | |||||||
| Security | TPM 2.0 (On-board IC) | |||||||
| GPIO | 1 x 8-bit Digital I/O | |||||||
| ME/Environment | |
|---|---|
| Dimension | 339 x 126 mm (13.33″ x 4.98″) |
| Power Supply | AT Mode / ATX Mode |
| Operating Temperature | 0 ~ 60 °C (32.0 ~ 140.0 °F) |
| Storage Temperature | -20 ~ 80 °C (-4.0 ~ 176.0 °F) |
| Relative Humidity | 5% to 95%, Non-condensing |
| Certification | CE / FCC Class A |
| OS | Windows 10 IoT Enterprise 2021 LTSC, Ubuntu, Red Hat Enterprise Linux, WR Linux, Yocto Project BSP Tool-based Embedded Linux Distribution (64-bit), Wind River VxWorks 7.0 |
| I/O Interface | |
|---|---|
| Super I/O | ITE IT5121E-I |
| Audio |
|
| Ethernet |
|
| Serial Port |
|
| USB |
|
| Keyboard & Mouse | TBD |
| GPIO | Onboard Programmable 8-bit Digital I/O |
Ordering Guide
| Category | Product | P/N | Description |
|---|---|---|---|
| PICMG 1.3 Full-Size | ROBO-8116G2AR-Q670E | AB1-3K68 | (R). ROBO-8116G2AR-Q670E. PICMG 1.3 (PCI-E + PCI), LGA1700, Intel® Q670E PCH, Intel® Core™ i3/i5/i7/i9 Processors, SHB with DP, HDMI®, DVI, Dual GbE, Audio, and Four COM Ports. |
| Packing List | |
|---|---|
| Standard | B6902932 SATA III Cable |
| B8981980 PICMG SBC Handling and Installation Guide | |
| B6902352 *(GP) Cable, DB9x2 to HSG (5×2)x2, L=300mm with Bracket for Ruby-9717 / Ruby-9718, CY-8A08006R, Chuan Yang | |
| Optional |
|
